Aside from lag, having to clean your gaming equipment is one of the worst things that can happen to a gamer. Seriously, who cleans their things, anyway? Gaming is for fun, not doing chores. But in those rare occasions when you decide that your console can’t really take much more, then you have no choice but to clean it, especially as far as dust is concerned. Dust is the biggest enemy your gaming set-up can possibly have. It can not only make your hardware run worse than it usually does, but it can also damage it beyond repair. And in the light of the holidays and the oncoming Christmas celebrations, when I assume many people get the new generation of consoles as presents, I decided to do a guide on how to properly clean and maintain and clean your console hardware and accessories. This will not only increase the longevity of your console,but it will also ensure that it runs great for as long as possible. It’s not going to be pleasant, let me tell you that much, but it’s worth doing if you are a true enthusiast and plan utilizing your new (or old console) in the best way possible.
This is possibly the most important step in the process. You need to unplug everything, otherwise you risk damaging the platform. Not only that, but you can also get hurt so it’s a good idea to apply extra caution. After all, you are working with sensitive equipment. Carefully unplug everything that can be plugged and make sure you don’t forget anything.
If some of the accessories aren’t plugged (like your controllers or headset) and are powered by batteries, instead, remove the batteries. You want to discontinue all power supply to both the console and its components.
Cleaning the exterior
There are several things that you will need here in order to accomplish this fairly simple task. First of all, buying a microfiber towel would yield better results in the cleaning process, even though this part is optional. You can use any lint-free old rag you can get your hands on. You will need two of them – one for the processing and one for the drying out. Also purchase an electronics spray (the kind of spray you can use to clean all sorts of electronics, like laptops, consoles, monitors and more). Spray some of the solution on the cloth and wipe off all the surfaces of your hardware. Dry out with the other cloth immediately so you make sure that everything works well afterwards. Never spray directly on the surface of the console or any of the periphery. This may very well damage the devices so be careful.
Cleaning the interior
Cleaning the interior is a bit trickier. You should open the console because odds are you don’t know what you’re doing (otherwise why would you be reading this?) so you might damage it. Spraying compressed air into the air vents of your device would be enough to remove a large portion of the dust outside the console. This way you don’t need to open it but you will still be able to clean most of it. Something to keep in mind is that compressed air comes out rather cold so you shouldn’t be keeping the device too close to the source. Otherwise the air will condensate inside and damage the console.
Cleaning peripheral devices
Use a cotton swab and some rubbing alcohol to clean the peripheral devices such as controllers, microphones, headsets, etc. Just make sure to dry it out immediately. If you’re not confident in your abilities to clean the console properly, seek the help of a specialist.
As a professional cleaner at http://www.fasthomecleaning.co.uk , Rose knows how to clean all kind of things.